Capital punishment and the death penalty Annotated Bibliography

Capital punishment and the death penalty - Annotated Bibliography Example They explain the stand of the church on the matter with supportive information from the bible. The author of this book discusses death penalty, providing an overview of its execution and a critically analysis this form of punishment with the question whether it is a fair solution or a moral failure. At some point, he looks at it as a government/state-sponsored killing and argues that it has a net brutalization effect of killing of more innocents. This book looks into the universal abolition of death penalty and the importance of abolishing it, evaluating it against human life (i.e. death penalty versus human life). It also looks into the families of both the condemned and the homicide victim. The author of this article tries to evaluate the forces that account for the legality of death penalty including social and political sources. By evaluating racial/ethnic threat theories, he explains why death penalty is present in some jurisdictions and absent in others. This article looks into two aspects of the question whether it is okay to implement death penalty: the ethical aspect and the epistemological one. That is, the morality of executions and the necessary burden of proof/the epistemological argument. This book critically evaluates capital punishment, which it presents as a form of punishment that follows the rule: ‘an eye for an eye’. It also offers statistical information on the support that death penalty receives from various regions. This article features the Council of Europe’s view on death penalty. The views are that death is not justice; death penalty is not a deterrent against crime; the justice system can and does make mistakes; human rights apply to everyone; and murderer should not be made into martyrs. The authors of this article attempt to answer the question whether capital punishment is morally required. They do so by narrowing down into the acts,

Energy Conservation In Commercial Hostel Engineering Essay

Energy Conservation In Commercial Hostel Engineering Essay Electrical energy is the most expensive and the most important form of purchased energy. The subject of energy conservation is a concern for most energy users particularly industries, commercial buildings and residential buildings. Energy Conservation becomes even more important for the developing countries, where the rising energy costs and the use of efficient energy apparatus are of significant concern to the utility. Today, energy and environment are two areas that have sought the greatest attention at the international level. With the issue of global environment, becoming important as never before, Energy particularly its conservation in industry and commercial building has become main target for all the parts of world that has to be achieved as soon as possible. In this paper, the application of the Energy conservation techniques by which electrical energy can be saved and made cost efficient for commercial (hostel) building perspective is presented. The selection of a commerci al (hostel) building was done because electrical energy constitutes only a major amount of the overall energy used. A complete energy conservation guideline is recommended. Electrical energy management approach for tariff control, power factor control, motor schedule control and lighting is outlined. Recorder data of energy consumption of a building service system are used to diagnose the weak points of the building energy usage system and then a detailed energy audit study are presented. Key Words: Energy audit, Energy Conservation, tariff control, motor scheduling 1. INTRODUCTION Electrical energy is the most common and widely used type of energy in the world. It is the most expensive and most important form of purchased energy. For this reason its use must be confined to a minimum for efficient operation. Because of its great flexibility, it offers many advantages over other energy and by doing the efforts to conserve energy can result in significant cost saving. In India, Commercial buildings use large amount of energy that is why, it is important to ensure a loss free and energy efficient system in buildings. In the developing countries where electrical energy resources are scarce and production of electricity is very costly, energy conservation study are of great importance. India is an important stage of rapid development and it has relatively shortage of energy resources. The gap between the power generation and required demand is increasing continuously. Reducing the gap in the generation side is very difficult and more expensive process. The cost of e lectrical energy will be increased due to the installation of new generating plant because of limited energy resources, scarcity of capital and high interest costs. The important way to reduce the gap between demand and supply is energy conservation. Energy conservation is necessary to reduce the increasing global warming. Individuals and organizations should conserve energy in order to decrease the energy costs and increase the economic security. The following two objectives are considered when discussing electrical energy conservation: Energy saving i.e. kWh saving Energy cost saving i.e. money saving 2. LITERTURE REVIEWS Frank kreith, D.Yogi Goswami (2008), have declared that energy is the important factor for production, along with labour, capital, and materials. Energy conservation denotes doing without, maybe giving up facilities to save energy. Due to products diversity and the manufacturing process requirement, the efficient utilization of energy varies with specific industrial operations. The organization of personnel and operations, concerned also varied. Consequently, each company should modify the effective energy management program for its plant operations. There are some universal guidelines, however, for initiating and implementing an energy management program. Many of the large companies have already used energy management programs and also they have realized substantial savings in fuel and electric costs. But in small industries, due to lacking of technical persons and equipment to implement the energy management program is difficult. In these environments, reliance on external consultants may be appropriate to initiate the program. But for successful operation internal is very essential. A well planned, organized, and executed energy Management program requires a strong commitment by top management [8]. Wood.G, Newborough.M (2007), have proposed that the suggestion for motivating energy saving behaviors [9]. Dimoudi.A, Kostarela.P (2009), have shown the energy consumption of Institutional buildings, due to their high number in the country, contribute to a considerable overall amount of energy consumption in public buildings that results in an increase of the expenses paid by the national budget. Thus, investigation of alternative solutions for the reduction of energy consumption in Institutional buildings is advisable and necessary. On the other hand, the pedagogic role of Institutional buildings needs the proper regulation of the parameters that influence the internal conditions in classes, as lack of thermal comfort and air quality conditions reduce the learning ability of pupils. Thus, an energy proficient strategy in school buildings has a dual purpose: energy conservation and enhanced indoor conditions in classrooms. Air quality studies performed at institutional buildings revealed that many of them have serious indoor air quality problems, while improvement of indoor Conditions are associated with considerable reduction in energy consumption and a global environmental quality. Improvement in thermal insulation decreases energy consumption, with the Case of insulation at the support frame having the highest benefits, resulting a reduction in energy consumption by 13.34%. Increase in the thickness of the wall insulation decreases the heating requirements and thus, reduces energy consumption up to 5.58%, a solution that is recommended for new and old no insulated buildings [10] . Guozhong Zheng, Y Ouyin Jing, Hongxia Huang, Guohua Shi, Xutao Zhang (2010), have shown that globally one-third of energy consumption is consumed by building sector. In energy conservation assessment, energy conservation star rating is established and used in the assessment. The objective of building conservation assessment is to establish and limit the maximum energy consumption in buildings and to encourage the utilization of renewable energy and new energy technologies and products [11]. 3. ENERGY AUDIT CONSERVATION As per the Energy Conservation Act 2001, Energy Audit is defined as The verification, monitoring and analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis and an action plan to reduce energy consumption . Energy Audit will help us to identifying the areas where energy wastage can occur and where scopes for improvement exist. To test electrical systems and identify conservation opportunities, the following steps must be carried out: Form Energy Survey team Carry out Preliminary Energy Survey Carry out Detailed Energy Survey The energy survey is the first step in collecting all the relevant data and after which the conservation techniques are to be applied. Data must be obtained for each type of energy used. Also the actual measurements of the various energy devices such as motors, lighting system and ceiling fan etc should be included as part of the energy survey. The energy survey team has the task to explore the potential areas of energy conservation based on the findings of the survey. This could involve energy management with motors, lighting system, tariff control and power factor management, the use of energy efficient devices, the possibility of cogeneration and the use of technical awareness and motivation programs for the industry personnel. How best to manage our energy consumption? We have four steps to manage best energy consumption in any organisation. These are listed as follows: Metering your energy consumption and collecting data Finding opportunities to save energy, and estimating how much energy each opportunity could save Tacking action to target the opportunities to save energy (i.e. tackling the routine waste and replacing or upgrading the inefficient equipment). Typically youd start with the best first Tracking your progress by analyzing your meter data to see how well your energy saving effort work The above four step process applies either way, its entirely up to you whether you consider you consider energy saving measures that involves buying new equipment or upgrading building fabric. In energy audit process we need to collect statistical data and finding the opportunities to save energy. But just finding the opportunities to save energy wont help us to save energy. We have to take action to target them. 3. ELECTRICAL ENERGY CONSERVATION FOR A HOSTEL BUILDING Background: In India, there are many institutes which have the hostel facilities. My institute is one of the best institutes in Haryana state. It has 10 hostels. In this paper energy conservation of one hostel is presented. By similar manner we do energy conservation of other hostel. This hostel was open for student use in 2002. 4. ANALYSIS AND METHODLOGY The objective here is to study and analyze the use of Electrical energy in the hostel building so as to; Determine the energy inputs to the various stages in the process carried out in the industry, thereby arriving at the energy content of the major products, and in particular identifying the process stages for which the largest amount of energy are needed. Decide where the most significant energy savings are possible, quantifying such savings and the cost of achieving them. Assist the industry administration in making recommendations on energy savings and in its policy and plans for energy conservation. A: Reduce fixed charges in Electricity Bill. To analyze the utility electricity bill, the tariff structure was studied. The tariff structure in Haryana state consists of the following charges: Energy (kWh) charges (varies as consumption increases) Fixed charges depend upon maximum demand Fuel adjustment charges (consumption dependant) B: REPLACE INEFFICIENT MOTORS WITH ENERGY EFFICIENT MOTOR AND CHANGE OPERATION SCHEDULE The average operating efficiency of the motor was very low and thus need to replace them with the energy efficient motors could improve energy savings significantly. The energy cost savings by replacing an old motor with an energy efficient motor is given by the following formula S = P*L*C*T (100B 100/A) Where S = Annual savings ($/year) P = kW rating of motor B (old inefficient) =15 kW C = Average Electricity cost ($/kWh) L = load factor (avg) =.80 T = running time (hour year) A = Efficiency of motor A (New EEM) B = Efficiency of motor B (Old inefficient) The efficiency of old motor was 75% and efficiency of new motor is 90%. The motor operate in a day is 7-8 hr. Then total operating period in a year is 2800hr. Total cost saving: Using above formula, the total cost saving is R 26133.33 Total investment cost: The total price of new Energy Efficient motors of the rating given above was to be found to be R 24000. The payback period and return on investment is 11.02 month. Operating schedule suggestion: Motor operate mostly in peak period so operation cost is high. We need to operate in off period it reduce the operation cost. C: Change lighting system. The existing lighting scheme at the hostel building was studied carefully and measurements were taken for each light levels and fixture ratings. A new scheme with consideration to maintain or enhance the existing lighting levels and reduce the kW rating was presented. The existing system of incandescent and mercury lighting was found to be consuming extra energy at the expense of lighting level. It was suggested to increase the light level while at the same time reduce the overall energy consumption. Existing system Proposed system Saving in kWh Incandescent 300 fixtures 100 watt each 1100hr/year Florescent 300 fixture 20 watt each hr/year Calculations: Kilowatt saving: This is calculated by the formula given by = (No. of fixture) [(present input watts/fixture)-(proposed input watt/fixture)] =watt/1000=KW KWh saving: This is calculated by the formula given by = (KW saving)*(annual operating hour) =kWh/year Power Factor Improvement Findings: The average power factor of the hostel varies between 0.85 and 0.87 since its commencement, which was well above the requirement of the SEB. The average power factor of the industry was 0.86 and the Maximum demand reached has been read as 260 KVA from the Load duration curve. The load level reached above the sanctioned demand of 260 KVA on certain short period of time was not considered for the power factor improvement project. So, at the average power factor, the load in KW was found to be 260* 0.86= 223.6 KW. Recommendations: We decided to improve the power factor to an average value of 0.98. The best locations for the capacitors were identified as i) at the sub-station itself to compensate the base load and ii) at the loads supply side as per the KW capacity, So that only when the load is on, the capacitors will be on. Additional capacitors were required to improve the power factor to 0.98. Benefits: For a load of 223.6 KW, the KVA demand at 0.98 power factor is (223.6/0.98) =228.16 Therefore, saving in KVA is (260 -228.16) =31.83 Annual saving in cost due to KVA reduction= $3.75*31.83*12= $1432.65 Cost on additional capacitors @ $35 per KVAR is $(30* 50) =$1500 Payback period (1500/1432.65)* 12= 12.56 say 13 months. Return on investment 1/13= 7.7% per month. Saving Through Peak Shaving As per the norms of the SEB, the maximum demand charges for any month at the point of supply shall be based on the highest KVA demand recorded during any consecutive thirty minutes in that month or 100% of the sanctioned demand, whichever is higher. In addition, for exceeding the sanctioned maximum demand, the charges per exceeded KVA shall be at double the normal rate (say penalty). Findings: The Maximum Demand during the financial years 1995-1996, 1996-1997, 1997-1998 and 1998-1999 has exceeded the Sanctioned Demand in March and April, due to the early summer peak loads, and the production target initiative at the beginning of the financial year. During the EC project period (1998-1999), the peak demand was found to be 2750 KVA. The industry did not want to apply for increased Sanctioned demand since for the rest of the period of 10 months, the load was well within the Sanctioned demand. It was noticed that the available Diesel generators were used only at the time of power-cut and at grid failure cases. Recommendations: The EC team recommended for the use of one 900 KVA Generator at the time of peak loads during 1998-1999 and to transfer the excess loads to the generator supply so as to avoid the excess KVA penalty charges. If critical loads also contribute to facility peaks, consider shifting these loads to generator power during peak periods. In case, if emergency backup power is needed, the remaining two Diesel Generators shall be put in service even during peak periods. Note: For the present project, the concept of Peak shaving was applied only for the loads exceeding the Sanctioned demand and not for all the loads above the base load. Benefits: Considering the peak demand during March-April of the financial year 1998-1999, i.e., 2750 KVA exceeding the Sanctioned demand by 150 KVA for duration of 3 hours/day: SEB Supply: Maximum demand charges payable to SEB/month $3.75 (2750 +2 *150) = $11 437.5. Energy consumption charges/month for a load of 2750 KVA at 0.92 power factor @ $0.0875/kWh is $159 390. Total charges payable/month is $170827.5. Generator Supply for a Load of 150 KVA: Maximum Demand charges $3.75* 2600= $9750. Energy consumption charges/month for the energy fed by SEB for a load of 2600 KVA at 0.92 power factor @ $0.0875 per kWh $150 696. Energy generated by the generator/month @ 3 hours/day for the peaking load of 150 KVA at 0.92 power factor lagging 150*0.92* 3* 30= 12420 kWh. Considering the capital investment, life time, the load factor, the annual operation and maintenance cost, the labour cost, the depreciation and the diesel fuel cost, the average energy cost for the Diesel generator supply is worked out to be $0.19/ kW-hr. Therefore, energy cost for the generator supply is $0.19*12420= $2359.8 and hence total charges incurred/month for the peak shaving option is $162 805.8. The EC team suggested the Board that more saving in energy cost could have been obtained through Renewable energy sources compared to the Diesel generator supply due to reduced generation cost. Net saving by peak shaving per month is $8021.7 and $96 260.4 for the whole year if peak shaving is applied for the entire 12 months @ 3 hours/day. D: Explore cogeneration feasibility: For the cocking purpose in hostel, we require fuel such as coal or LPG (liquid petroleum gas). If we use coal, it is more carbon intensive than oil or natural gas. It produce large amount of carbon dioxide. So, we uses natural gas i.e. LPG but it is more costly than coal. So, this problem we need to setup a goober gas plant in hostel. The input to the goober gas plant is human waste. The gas produce by the plant is used for cocking purpose. It reduces the fuel cost and carbon dioxide emission. 1) Intake tank 2) Mixture of dunk and water 3) Brick walls 4) Metal cover 5) Valve 6) Used sludge 7) Pipe to kitchen 8) Input pipe 9) Brick wall 10) Ground level CONCLUSIONS The analysis and calculation of electrical energy conservation of the glass sheet industry for a developing country were carried out, even though the amount of the electrical energy used was low (1.77%) compared to the gas energy ( 98.23%) provided to the said industry, remarkable energy cost savings were demonstrated and is accounted for some 49.23% of the total annual industry electricity cost. Adapting and following the electrical energy conservation guidelines are recommended for a developing country glass industry. These recommendations if applied to any similar industry in other developing countries may also lead to very reasonable cost savings. Having listed all the different remedies which should be taken to have electrical energy conservation, the implementation and the application of these recommendations is very crucial in the glass industry of developing countries to reach the desired cost savings. Focus should be directed to the demand side management, and the use advanced electronic programmable switching for achieving the desired savings. Gas heat energy is a potential savings even though its cost is less than fossil oils. A developing country which does not possess these raw materials may face higher energy prices in this sector. Therefore, instead, a complete updating, maintenance and the use of energy efficient equipment may reduce energy costs. The limited capital and investment become an obstacle for applying a comprehensive conservation plan in developing countries. Therefore partial solutions if followed may give pronounce energy cost savings. Generally, in a developing country, capital, raw material and the lack of advanced Technology equipment is of a direct relationship to energy cost savings.

The Physics Behind the Power of an Engine :: Physics Engine Essays

The Physics Behind the Power of an Engine Insert the key, turn, and vroom. And down the road you go. Most people take for granted the strange conglomeration of metal and plastic under that sheet of metal either in front or back of their vehicle. The engine as you may have guessed, is modern marvel- so to speak. They’re found in cars, trucks, boats, airplanes†¦All with various power outputs. To discuss the power output, first the cycles of the engine itself needs to be mentioned. 1.Intake: The intake valve opens allowing fresh oxygen rich air mixed with fuel to enter the cylinder. 2.Compression: The piston is pushed upward by the flywheel's momentum compressing the air/fuel mix. 3.Combustion: As the piston reaches the top of its stroke or TDC, the spark plug fires, igniting the mixture. Due to the high compression of this mixture it is very volatile and it explodes when the spark is introduced. This pushes the piston downward and produces power. 4.Exhaust: After the Air/Fuel mix has been burnt the remaining chemicals in the cylinder (water and CO2 for the most part) must be removed so that fresh air can be brought in. As the piston goes back up after combustion the exhaust valve opens allowing the exhaust gasses to be released. Ideally an engine takes in Air (Oxygen and Nitrogen) and fuel (hydrocarbons) and produces CO2, H2O, and the N2 just passes through. However under normal driving conditions an engine will encounter lean conditions when cruising on the highway (better mileage) and rich conditions when accelerating (better power). The lean condition results in oxide and harmful nitrogen production. Rich conditions result in carbon monoxide production. For this reason catalytic converters are used on an engine’s exhaust. The catalyst material in a cat is in a wire mesh or honeycomb. This allows a high surface area to be exposed to the passing exhaust gasses. The catalyst converts the harmful nitrogen oxides and carbon monoxide into nitrogen, carbon dioxide, and oxygen. Catalytic converters work best when warm, so some car manufacturers are putting "pre cats" in the exhaust manifold to convert the gasses while the exhaust system is still warming up. Engine output is measured in two ways. The first is a direct measurement of engine output: Torque. Torque is defined as the amount of mass that can be lifted a certain distance from the center of rotation. Torque is what accelerates a car.

English Literature GCSE- Controlled Assessment Essay

Explore the ways Shakespeare and Dickens present Lady Macbeth and Miss Havisham as disturbed characters Shakespeare and Dickens both show disturbed characters in their play or novel. Shakespeare wrote Macbeth in1606, this gives us better idea of the time were they thought that witches were real and Shakespeare wrote this play because he wanted to impress the king. On the other hand Dickens didn’t want to impress anyone by writing a novel based on someone else. In Great Expectations Dickens introduces Pip as a weeping boy who is grieving over his dead family in the churchyard, immediately we can see that something is wrong and this is not normal behaviour for a child. Pip is all alone and terrified; the reader senses that something disturbing is about to happen. In the Victorian times many people believed in ghosts and the supernatural, therefore they would have expected disturbing events such as this. However, Pip is not met with ghosts nut instead faces a convict Magwitch. Ma gwitch is described as â€Å"A fearful man, all in coarse grey, with an iron on his leg.† Dickens conveys to the reader through the word â€Å"fearful† and furthermore in using the colours â€Å"grey and iron† this suggest that somebody is made of metal and is washed out of colour. An â€Å"iron† on his leg represents that he has escaped from prison and he is danger towards people. But in Great Expectations he might be disturbed but Magwitch is good hearted, Dickens shows this by making out that he is decent enough to take the blame for Pip’s theft, although Pip was terrified to meet his at first he comes to love Magwitch a good and noble man. In Macbeth, William Shakespeare describes Macbeth by a brave and noble soldier, ready to die for his king, Duncan. However when Macbeth was introduced to the three witches, they had a powerful effect on him. When he realised that what they say had become true, especially when he learns that when the three witches had said that he would become the Thane of Cawdor. The three witches were placed in a heath which tells the audience that they are not within society because they wanted to be alone and not be civilised. This suggests that the witches would have made Macbeth a disturbed character because they say things to him like â€Å"All hail, Macbeth! Hail to thee, thane of Glamis! All hail, Macbeth, hail to thee, thane of Cawdor! All hail, Macbeth, thou shalt be king hereafter!† this would make him a bit big headed, because he thinks more and more about being king, and he is easily persuaded to agree  to murder Duncan. Occasionally he appears weak by having strange visions, he asks a lot of questions he cannot make a decision and never really seems sure of himself. For example when he murders King Duncan he relies on his wife to find him an alibi because he was in a panic and couldn’t think straight. Later in the paly he appears to be in control more often and less dependent on his wife. For instance he plans to murder Banquo wi thout telling his wife what he his plans were, he also ignores his vision and make decisions quickly and gives orders rather than asking the questions. This suggests that Macbeth might be the most disturbed character in Macbeth because he has no control over the witches and what he feels. I think that Macbeth is a more disturbed than Pip because he was influenced by his wife to murder king Duncan and others that he was close too. He was very easy to convince, as his wife stated to kill the King he was scare at first but then agreed to it. Also when he spoke to the witches they found it easy to convince him that he would be king and everyone would obey him. This shows that Macbeth is a disturbed character because in the being of the play it shows that he was a loyal leader that fought for his king in war but during the end he became unfaithful and turned against them killing them. In Great expectations Pip wanted to become a â€Å"gentleman† because he wanted to impress Estella so she wouldn’t despise. Not knowing what this could do to him he went to London to learn manners. Pip grows shallow and conceited. This shows that he is disturbed by changing and forgetting everyone that has helping him in the past when he was all alone. Pip was taken by his Uncle Pumblechook to Satis house. Miss Havisham being left at her wedding had stopped all the clocks to the time of her ceremony, and sits in her wed ding dress. Miss Havisham had told Pip to play cards with her adopted daughter Estella, Estella is beautiful and Pip falls in love with her. But Miss Havisham has bought her up to wreak revenge on men, and Estella humiliates him. After 5 years a London Lawyer had come to visit Pip and tells him that unknown benefactor has given him a huge sum of money for Pip to become a ‘gentleman’. Pip assumes that it was Miss Havisham that had given all that money to him and wants him to marry Estella. After a while Pip receives a visitor Magwitch the convict. Magwitch made a fortune in Australia and it was him that had sent Pip the money

Labour Day Essay

As the world acknowledges the hard and tedious work of a laborer and celebrates the Labor Day with great zeal and zest, an ordinary laborer continues to work hard mindless of what goes around, to make it through the day. Aspiring to make this world a better working place, May 1 marks the labor day when debates and talks are held, sessions and processions are carried out and banners and brochures are distributed all over the world. In a hope to provide the laborers better working conditions and opportunities for better socio-economic outcomes, more is said than what is actually done about it. Labor Day is celebrated in various countries across the globe at varying days of the year to honor the achievements and contributions of workers as well as to spread awareness about the working conditions and wage issues of laborers. In Pakistan, the labor policy was started in 1972 and 1st May was declared as the Labor Day and a public holiday. As a member of International Labor Organization (ILO), Pakistan observes the Labor Day in relation to its activities to improve the working conditions of laborers and to acknowledge their contributions. As a member of ILO, it is the responsibility of Pakistan state to uphold the core values of ILO and to devise policies and schemes to protect the interests of workers. But what happens on ground is a totally different story. There is a more of talking and less of action. So 1st May comes and yes we enjoy a day off, read in newspapers and blogs about Labor Day, watch special TV programmes and then just get along with our daily routines and as soon as the day ends we forget all about it. But for the laborers the situation is ugly. Sky rocketing prices, soaring inflation, excessive load shedding of electricity and gas, low wages, rising poverty and poor law and order conditions, all contribute to make the life of people generally and of laborers particularly, utterly miserable Reality Ch eck: The conditions in which laborers work are bad, to say the least. Long working hours, low wages, lack of health facilities, safety measures, and social protection are the vital issues of the working class, but the mindset of our elitist groups and the common practice of factory owners is to deny the basic rights of laborers and to press them against the wall. The only way to change the course of events, to change this mindset of paying less and making the workers work for long arduous shifts is to bring in strong legislative changes and to protect them through  strict regulations. nothing will change until the government formulates new laws and policies. The truth is Pakistan has have the history of bad naming itself not just because of ill-bread policies or lack of proper regulatory and enforcing system but also because of its lack of interest to nip the evils of child labor and of that of bonded labor. Every major city of Pakistan and the neighboring areas of these cities see factories, cottage industries, brick kilns and similar working places filled with malnourished young children working 9-10 hours a day for less than Rs.300 a day. Young girls, women as well as elderly people are seen making bricks in brick kilns in harsh weather conditions yet they have no hope to escape these conditions since majority of workers in these kilns are bonded labor- where every newborn comes to life with a big baggage full of interest money to pay on a loan his great grandfather once took, years and years ago. Every year on May 1, we remember our laborers and workers because we know how much we need them, yet Labor Day brings along nothing more than some enthusiastic but highly unrealistic speeches, pretentious promises and stalemate guarantees. If something meaningful has to be done for a class who is the backbone of our economy, now is the time to change our words into productive actions.